 |
A pair of purge bellows is available for the Cyclone® series gas cells. These fit between the optics box of the cell and the spectrometer to allow the purging of transfer optics with inert gases such as nitrogen.
This feature allows absorbances due to atmospheric H₂O and CO₂to be eliminated from spectral measurements. These bellows are designed to fit all Specac gas cells.
 |
These caps are designed to fit over the optical inlet and outlet ports of the Cyclone® series gas cells to seal the transfer optics when the cells are not in use. |
 |
A pressure gauge kit is available to fit the Cyclone® series gas cells. Gauges can be specified for low pressure operation (vacuum to 15 psi) and high pressure operation (vacuum to 125 psi - metal bodied cell only). An integral pressure relief valve ensures that cells are automatically depressurised in the event of accidental over pressurisation. Specac recommend the use of a pressure gauge when operating gas cells at elevated pressures. |
 |
All of the Cyclone® series gas cells (glass and metal bodied versions) can be upgraded to heatable gas cells by the addition of the appropriate Heating Jacket and High Stability Temperature Controller. |
 |
This accessory allows the visual verification of the optical pathlength through Cyclone® series gas cells. |