Need help? Spain: 93 674 88 00 Int. Calls +34 93 669 86 50
AREA/LANGUAGE
Choose your country or area Language: Spanish/English
America Europe Africa Asia Oceania

Super Clean Gas Filters

The carrier gas must contain less than 1 ppm of oxygen, moisture or other contaminants to prevent column degradation, increase lifetime and decrease stationary phase bleed.

Super Clean gas filters will definitely contribute to achieve this purity and obtain chromatographic results free of ghost peaks, allowing the analysis of trace compounds. They will reduce the time and cost of equipment maintenance.

The advantages of using gas line purifiers with a base plate make changing filters quick and easy. Cartridges can be changed without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. It is no longer necessary to loosen and tighten fittings every time a trap is changed, preventing your system from becoming contaminated in the process.

 

Characteristics

 

• High impurity holding capacity

• Trap provides 99.9999% purity output gas

• Quick connect" system facilitates quick and safe cartridge replacement

• Glass inside to prevent diffusion of contaminants and plastic outside for safety

• Recyclable or renewable materials

• Trap exhausted indicator.

• Helium and hydrogen specific traps available

Selection of filters according to applications
Types
Downloads

ECD & MS Triple filter to remove O2/Moisture/Hydrocarbons from carrier gas

 

GC/MS Triple filters specific for Helium from the carrier gas, removes O2/Moisture/Hydrocarbons and is conditioned with Helium.

 

FID High capacity filters to remove O2/moisture/hydrocarbons from the carrier gas and 2 combi filter hydrocarbons/moisture for

purifying gases (air and H2) used in a FID.

 

LC/MS filters to purify the N2 from hydrocarbons and one particulate air filter

 

TOC Filter for removal of carbon dioxide and sulphur from a gas stream is used in combination with a humidity filter

Use moisture filters :Moisture in carrier gas lines will prematurely degrade oxygen and hydrocarbon traps and increase detector noise.

As a precaution, we highly recommend installing a moisture trap before the hydrocarbon and oxygen traps on all carrier gas lines.

 

Use Oxigen filter: Oxygen is a column killer. It is present even in UHP gases, as minutes leaks at fittings allow oxygen to influx against

the concentration gradient. Because oxygen can enter a gas line at any fitting or during gas bottle exchange, the oxygen trap should be

the last connection before the gas line enters the chromatograph

 

Use Hydrocarbon filter: Use a hydrocarbon trap if your gas has a potential source of hydrocarbon contaminants or if you suspect you are

observing carrier gas ghost peaks. Install the hydrocarbon trap after the moisture trap, to prevent moisture from degrading the hydrocarbontrapping

ability of the activated carbon in the hydrocarbon trap.

 

Fuel Gas filter: Is a combi (hydrocarbon/moisture) filter. The Fuel Gas Filter is perfect for purifying flame ionization detector (FID) fuel gases, removing

both moisture and hydrocarbons. Using the Fuel Gas Filter for FID Hydrogen and air will produce a stable baseline, improving overall reproducibility and sensitivity.

Choose your product
showing 8 of 8 products
Description
SGT Filter (5)
SGT Filter Combi (1)
SGT Filter Triple (2)
Gas Removal
Carbon Dioxide / Sulfur (1)
Hydrocarbon (2)
Moisture (1)
Moisture / Hyidrocarbon (1)
Oxygen (1)
Oxygen / Moisture / Hyidrocarbon (2)
Capacity
1,8 g H₂O / 500 mL O₂ / 7 g (as n-butane) Cx Hy (1)
1,8 g H₂O / 500 mL O₂ / 7 g Cx Hy Especifico He (1)
1000 mL (1)
12 g (CO₂) (1)
24 g (as n-butane) (2)
3,5 g H₂O / 12 g (as n-butane) (1)
7,2 g (1)
Indicator
CO₂ (1)
H₂O (2)
H₂O / O₂ (2)
O₂ (1)
Reference SG-SGT-F0101
Description Moisture GC-filter, standard,  ultra capacity- with indicator
Price 167,00€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0102
Description Oxygen GC-filter,standard,  ultra capacity  with indicator  
Price 167,00€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0103
Description Charcoal GC-filter,standard,  ultra capacity
Price 167,00€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0105
Description SGT CO2/Sulfur Filter
Price 208,15€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0201
Description GC-Filter,Combi, high capacity (Charcoal/moisture)fuel gas usage
Price 187,41€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0301
Description GC-Filter,Triple  (O2/Moisture /Charcoal) carrier gas purifie purifier for FID-ECD-NPD-MS
Price 189,95€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0302
Description Filtro triple específico He  para GC-MS
Price 238,39€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
Reference SG-SGT-F0720
Description LC-Filter bundle of 2(charcoal  2x for LC-MS:N2 purification) high flow without indicato
Price 317,43€
Quantity
To be able to buy you must be registered Sign up
To use the Favorites List you must be registered Sign up
showing 8 of 8 products